This course is intended for those working from height outside the platform of a Mobile Elevating Work Platform. It is a full, comprehensive knowledge course, not an awareness course. The blended, online portion will take approximately 3.5 hours to complete. It is recommended that a basic skills assessment donning a harness be completed afterwards. This course follows the guidelines and standards referenced in the New Brunswick Occupational Health and Safety Act and Regulations, Canadian Standards Association, and the Canadian Centre for Occupational Health and Safety (CCOHS), ANSI, and OSHA.
This course is intended for workers who have confined spaces at their workplaces. It provides all the information they need learn to safely enter and work with confined spaces. It is a full, comprehensive knowledge course, not an awareness course. It will take approximately 3.5 hours to complete. This course follows the guidelines, principles and recommendations established by the New Brunswick Occupational Health and Safety Act and Regulations.
This course is intended for anyone who may encounter wildlife while at work or play and wants to know what to do in the event of an encounter. It is a full, comprehensive knowledge course and is proudly hosted by Saga Training for iSafety. The blended, online portion will take approximately 3 hours to complete. It is recommended that a basic skills assessment deploying bear spray be completed afterwards. Suncor Energy has approved this course for its workers and contractors and requires the deployment of bear spray as part of the training.
This course is intended for those who want to understand fires. It discusses fire prevention, planning and suppression focusing on the use of portable fire extinguishers. It is a full, comprehensive knowledge course, not an awareness course. The blended, online portion will take approximately 3 hours to complete. Once the online knowledge portion is complete. It is recommended that a basic skills assessment operating a portable fire extinguisher be completed afterwards. This course follows the established and accepted guidelines, principles, and recommendations of internationally recognized fire safety organizations.
This course is intended for those who may be exposed to hazards such as low oxygen, caustic, or toxic atmospheres. Respiratory Protective equipment is extremely crucial to the wellbeing of any worker who may be exposed to a hazardous environment. It is a full, comprehensive knowledge course, not an awareness course. The blended, online portion will take approximately 3 hours to complete. It is recommended that a basic skills assessment donning and doffing SCBA be completed afterwards. This course follows the established and accepted guidelines, principles and recommendations established by the New Brunswick Occupational Health and Safety Act and Regulations and the Canadian Standards Association.
This course is intended for those wanting to understand the how gases behave and how they’re controlled. It is designed to introduce the end-user to the basic concepts, hazards, and hazard control processes associated with atmospheric testing. It is a full, comprehensive knowledge course, not an awareness course. It will take approximately 3 hours to complete. This course follows the guidelines, principles and recommendations established by common Occupational Health and Safety (OH&S) legislation, and industry established and accepted safety standards.
Front-end, Skid Steer, and Compact Track Loader Operator
This course is intended for skid steer and compact track loader operators. It provides the minimum training requirements to ensure operators have the basic knowledge and skills required for the safe operation of their loader and its attachments. This is a full, comprehensive knowledge course, not an awareness course. The blended, online portion will take approximately 3 hours to complete. After completing the online portion, the CSA standard requires an operator complete a basic skills assessment for the equipment they operate. This course follows the guidelines, principles and recommendations established by the New Brunswick Occupational Health and Safety Act and Regulations, Canadian Standards Association, and the Canadian Centre for Occupational Health and Safety (CCOHS).
Powered Mobile Equipment Operator
This course is intended for Powered Mobile Equipment operators. It provides the minimum training requirements to ensure operators have the basic knowledge and skills required for the safe operation of their equipment and its attachments. The course can be applied to most PME but focuses on loaders, lift trucks (classes 1,2,3,4,5, 7 including variable reach), excavator, motor grader, and crawler dozer. It is a full, comprehensive knowledge course, not an awareness course. The blended, online portion will take approximately 3 hours to complete. After completing the online portion, the CSA standard requires an operator complete a basic skills assessment for the equipment they operate. This course follows the guidelines, principles and recommendations established by the New Brunswick Occupational Health and Safety Act and Regulations, Canadian Standards Association, and the Canadian Centre for Occupational Health and Safety (CCOHS).
Mobile Elevating Work Platforms Operator
This course is intended for Mobile Elevating Work Platform (MEWP) operators and their passengers. It provides the minimum training requirements to ensure operators have the basic knowledge and skills required for the safe operation of their MEWP’s and focuses primarily on boom lifts and scissor lifts but can also be used for other types of lifts found in the workplace. It is a full, comprehensive knowledge course, not an awareness course. The blended, online portion will take approximately 3 hours to complete. After completing the online portion, the CSA standard requires an operator complete a basic skills assessment for the equipment they operate. This course follows the guidelines, principles and recommendations established by the New Brunswick Occupational Health and Safety Act and Regulations, Canadian Standards Association, and the Canadian Centre for Occupational Health and Safety (CCOHS), ANSI, and OSHA.
Skid Steer and Compact Track Loader Operator
This course is intended for skid steer and compact track loader operators. It provides the minimum training requirements to ensure operators have the basic knowledge and skills required for the safe operation of their loader and its attachments. This is a full, comprehensive knowledge course, not an awareness course. The blended, online portion will take approximately 3 hours to complete. After completing the online portion, the CSA standard requires an operator complete a basic skills assessment for the equipment they operate. This course follows the guidelines, principles and recommendations established by the New Brunswick Occupational Health and Safety Act and Regulations, Canadian Standards Association, and the Canadian Centre for Occupational Health and Safety (CCOHS).
Lift Truck Operator
This course is intended for lift truck (forklift) operators. It provides the minimum training requirements to ensure operators have the basic knowledge and skills required for the safe operation of their lift truck and its attachments. It is a full, comprehensive knowledge course, not an awareness course. The blended, online portion will take approximately 3 hours to complete. After completing the online portion, the CSA standard requires an operator complete a basic skills assessment for the equipment they operate. This course follows the guidelines, principles and recommendations established by the New Brunswick Occupational Health and Safety Act and Regulations, Canadian Standards Association, and the Canadian Centre for Occupational Health and Safety (CCOHS).
Lift Trucks with Variable Reach Lift Truck Operator
This course is intended for lift truck (forklift) and variable reach lift trucks (VRLT) operators. It provides the minimum training requirements to ensure operators have the basic knowledge and skills required for the safe operation of their lift truck and its attachments. It is a full, comprehensive knowledge course, not an awareness course. The blended, online portion will take approximately 3 hours to complete. After completing the online portion, the CSA standard requires an operator complete a basic skills assessment for the equipment they operate. This course follows the guidelines, principles and recommendations established by the New Brunswick Occupational Health and Safety Act and Regulations, Canadian Standards Association, and the Canadian Centre for Occupational Health and Safety (CCOHS).
Variable Reach Lift Truck Operator
This course is intended for variable reach lift truck (VRLT) operators. It provides the minimum training requirements to ensure operators have the basic knowledge and skills required for the safe operation of their machine and its attachments. It is a full, comprehensive course, not an awareness course. The blended, online portion will take approximately 3 hours to complete. After completing the online portion, the CSA standard requires an operator complete a basic skills assessment for the equipment they operate. This course follows the guidelines, principles and recommendations established by the New Brunswick Occupational Health and Safety Act and Regulations, Canadian Standards Association, and the Canadian Centre for Occupational Health and Safety (CCOHS).
Front-end Loader Operator
This course is intended for front-end loader operators. It provides the minimum training requirements to ensure operators have the basic knowledge and skills required for the safe operation of their loader and its attachments. This is a full, comprehensive knowledge course, not an awareness course. The blended, online portion will take approximately 3 hours to complete. After completing the online portion, the CSA standard requires an operator complete a basic skills assessment for the equipment they operate. This course follows the guidelines, principles and recommendations established by the New Brunswick Occupational Health and Safety Act and Regulations, Canadian Standards Association, and the Canadian Centre for Occupational Health and Safety (CCOHS).
Skid Steer Loader Operator
This course is intended for skid steer loader operators. It provides the minimum training requirements to ensure operators have the basic knowledge and skills required for the safe operation of their loader and its attachments. This is a full, comprehensive knowledge course, not an awareness course. The blended, online portion will take approximately 3 hours to complete. After completing the online portion, the CSA standard requires an operator complete a basic skills assessment for the equipment they operate. This course follows the guidelines, principles and recommendations established by the New Brunswick Occupational Health and Safety Act and Regulations, Canadian Standards Association, and the Canadian Centre for Occupational Health and Safety (CCOHS).
Cranemasters - Overhead Crane
This course is intended for those operating overhead cranes. It is a full, comprehensive self-guided online knowledge course, not an awareness course. Saga Training is proud to host this course for Cranemasters. The blended, online portion will take approximately 2 hours. It is recommended that a basic skills assessment operating a crane with a load be completed afterwards. This course follows the guidelines, principles and recommendations established by common Occupational Health and Safety (OH&S) legislation, and industry established and accepted safety standards.
Cranemasters - Basic Rigging - Level 1
This course is intended for those needing to prepare a load for hoisting. It is a full, comprehensive knowledge course, not an awareness course. Saga Training is proud to host this course for Cranemasters. The blended, online portion will take approximately 3.5 hours. It is recommended that a basic skills assessment rigging a load be completed afterwards. The most current ASME standards were used to create this new 2020 Basic Rigging – Level 1 course and follows the guidelines, principles and recommendations established by common Occupational Health and Safety (OH&S) legislation, and industry established and accepted safety standards.
Cranemasters - Overhead Crane and Rigging Combo
This course is intended for those needing to prepare a load for hoisting and operating overhead cranes. It is a full, comprehensive self-guided online knowledge course, not an awareness course. Saga Training is proud to host this course for Cranemasters. The blended, online portion will take approximately 4.5 hours. It is recommended that a basic skills assessment operating a crane with a load be completed afterwards. The most current ASME standards were used to create this new 2020 Basic Rigging – Level 1 course and follows the guidelines, principles and recommendations established by common Occupational Health and Safety (OH&S) legislation, and industry established and accepted safety standards.