Fall Protection Training Edmonton

This course is intended for those working from height outside the platform of a Mobile Elevating Work Platform. It is a full, comprehensive knowledge course, NOT an awareness course. The blended, online portion will take approximately 3.5 hours to complete. It is recommended that a basic skills assessment donning a harness be completed afterwards. This course follows the guidelines and standards referenced in the Newfoundland and Labrador Occupational Health and Safety Act, and Regulations, Canadian Standards Association, and the Canadian Centre for Occupational Health and Safety (CCOHS), ANSI, and OSHA.

Fall Protection

Confined Space Training

This course is intended for workers who have confined spaces at their workplaces. It provides all the information they need learn to safely enter and work with confined spaces. It is a full, comprehensive knowledge course, NOT an awareness course. It will take approximately 3.5 hours to complete. This course follows the guidelines, principles and recommendations established by the Newfoundland and Labrador Occupational Health and Safety Act, and Regulations.

Wildlife Awareness Training

This course is intended for anyone who may encounter wildlife while at work or play and wants to know what to do in the event of an encounter. It is a full, comprehensive knowledge course and is proudly hosted by Saga Training for iSafety. The blended, online portion will take approximately 3 hours to complete. It is recommended that a basic skills assessment deploying bear spray be completed afterwards. Suncor Energy has approved this course for its workers and contractors and requires the deployment of bear spray as part of the training.

Wildlife Awareness (Suncor Energy Approved)

Fire Safety Training

This course is intended for those who want to understand fires. It discusses fire prevention, planning and suppression focusing on the use of portable fire extinguishers. It is a full, comprehensive knowledge course, NOT an awareness course. The blended, online portion will take approximately 3 hours to complete. Once the online knowledge portion is complete. It is recommended that a basic skills assessment operating a portable fire extinguisher be completed afterwards. This course follows the established and accepted guidelines, principles, and recommendations of internationally recognized fire safety organizations.

Self Contained Breathing Apparatus Training

This course is intended for those who may be exposed to hazards such as low oxygen, caustic, or toxic atmospheres. It follows the established and accepted guidelines, principles and recommendations established by the Alberta Occupational Health and Safety (OH&S) Act, Regulation and Code and the Canadian Standards Association.

Hazardous materials training

This course is intended for those wanting to understand how gases behave and how they’re controlled. It follows the guidelines, principles and recommendations established by common Occupational Health and Safety (OH&S) legislation, and industry established and accepted safety standards.

Detection and Control of Hazardous Materials

Heavy Equipment Training

Front-end, Skid Steer, and Compact Track Loader Operator

This course is intended for front-end, skid steer and compact track loader operators. It follows the guidelines, principles and recommendations established by the Newfoundland and Labrador Occupational Health and Safety Act, and Regulations, Canadian Standards Association, and the Canadian Centre for Occupational Health and Safety (CCOHS).

powered mobile equipment

Powered Mobile Equipment Operator

This course is intended for Powered Mobile Equipment operators of multiple various pieces of equipment. It follows the guidelines, principles and recommendations established by the Newfoundland and Labrador Occupational Health and Safety Act, and Regulations, Canadian Standards Association, and the Canadian Centre for Occupational Health and Safety (CCOHS), ANSI, and OSHA.

Scissor Lift Training

Mobile Elevating Work Platforms Operator

This course is intended for Mobile Elevating Work Platform (MEWP) operators and their passengers. It follows the guidelines, principles and recommendations established by the Newfoundland and Labrador Occupational Health and Safety Act, and Regulations, Canadian Standards Association, and the Canadian Centre for Occupational Health and Safety (CCOHS), ANSI, and OSHA.

Heavy Equipment Training

Mobile Elevating Work Platforms with Operator Fall Protection

This course is intended for Mobile Elevating Work Platform (MEWP) operators and their passengers. The fall protection portion is intended strictly for those working inside the platform of their Mobile Elevating Work Platform. It follows the guidelines and standards referenced in the Alberta Occupational Health and Safety Act Regulation and Code, Canadian Standards Association, and the Canadian Centre for Occupational Health and Safety (CCOHS), ANSI, and OSHA.

Fall Protection Training Edmonton

Fall Protection for Mobile Elevating Work Platform Operators

This course is intended for those at height working strictly inside the platform of their Mobile Elevating Work Platform. It follows the guidelines and standards referenced in the Alberta Occupational Health and Safety Act Regulation and Code, Canadian Standards Association, and the Canadian Centre for Occupational Health and Safety (CCOHS), ANSI, and OSHA.

skid steer loader training

Skid Steer and Compact Track Loader Operator

This course is intended for skid steer and compact track loader operators. It follows the guidelines, principles and recommendations established by the Alberta Occupational Health and Safety (OH&S) Act, Regulation and Code, Canadian Standards Association, and the Canadian Centre for Occupational Health and Safety (CCOHS).

Forklift Training

Lift Truck Operator

This course is intended for lift truck (forklift) operators. It provides the minimum training requirements to ensure operators have the basic knowledge and skills required for the safe operation of their lift truck and its attachments. It is a full, comprehensive knowledge course, not an awareness course. The blended, online portion will take approximately 3 hours to complete. After completing the online portion, the CSA standard requires an operator complete a basic skills assessment for the equipment they operate. This course follows the guidelines, principles and recommendations established by the Newfoundland and Labrador Occupational Health and Safety Act, and Regulations, Canadian Standards Association, and the Canadian Centre for Occupational Health and Safety (CCOHS).

Scissor Lift Training

Lift Trucks with Variable Reach Lift Trucks Operator

This course is intended for lift truck (forklift) and variable reach lift trucks (VRLT) operators. It provides the minimum training requirements to ensure operators have the basic knowledge and skills required for the safe operation of their lift truck and its attachments. It is a full, comprehensive knowledge course, NOT an awareness course. The blended, online portion will take approximately 3 hours to complete. After completing the online portion, the CSA standard requires an operator complete a basic skills assessment for the equipment they operate.

Scissor Lift Training

Variable Reach Lift Truck Operator

This course is intended for variable reach lift truck (VRLT) operators. It follows the guidelines, principles and recommendations established by the Alberta Occupational Health and Safety (OH&S) Act, Regulation and Code, Canadian Standards Association, and the Canadian Centre for Occupational Health and Safety (CCOHS).

Front End Loader

Front-end Loader Operator

This course is intended for front-end loader operators. It follows the guidelines, principles and recommendations established by the Newfoundland and Labrador Occupational Health and Safety Act, and Regulations, Canadian Standards Association, and the Canadian Centre for Occupational Health and Safety (CCOHS).

Heavy Equipment Training

Skid Steer Loader Operator

This course is intended for skid steer loader operators. It follows the guidelines, principles and recommendations established by the Alberta Occupational Health and Safety (OH&S) Act, Regulation and Code, Canadian Standards Association, and the Canadian Centre for Occupational Health and Safety (CCOHS).

Cranemasters

Cranemasters - Overhead Crane

This course is intended for those operating overhead cranes. It follows the guidelines, principles and recommendations established by common Occupational Health and Safety (OH&S) legislation, and industry established and accepted safety standards.

Safety Training Edmonton

Cranemasters - Basic Rigging - Level 1

This course is intended for those needing to prepare a load for hoisting. The most current ASME standards were used to create this new 2020 Basic Rigging – Level 1 course and follows the guidelines, principles and recommendations established by common Occupational Health and Safety (OH&S) legislation, and industry established and accepted safety standards.

Cranemasters

Cranemasters - Overhead Crane and Rigging Level One Combo

This course is intended for those needing to prepare a load for hoisting and operating overhead cranes. The most current ASME standards were used to create this new 2020 Basic Rigging – Level 1 course and follows the guidelines, principles and recommendations established by common Occupational Health and Safety (OH&S) legislation, and industry established and accepted safety standards.